Wireless Bridge - D-Link DSL-2740B User Manual

Section 7 - Advanced Setup
The Wireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or more WDS-enabled devices
into your wireless network. You can only establish WDS links with WDS-enabled devices.
AP Mode: Select Access Point's functionality to be Access Point or pure Wireless
Bridge. You can select Wireless Bridge (also known as Wireless
Distribution System) to disables access point functionality. Selecting
Access Point enables access point functionality and Wireless bridge
functionality will still be available and wireless stations will be able to
associate to the AP.
Bridge Restrict:
Select Disabled to turn off wireless bridge restrictions. Any wireless
bridge will be granted access. Selecting Enabled or Enabled (Scan)
enables wireless bridge restriction. If enabled, only the specified
bridges are granted access.
Click Save/Apply to configure the wireless bridge options and put the modifications
into effect.
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Wireless Bridge

47