Networking Basics; Check Your Ip Address - D-Link DSL-2740B User Manual

Adsl 2+ modem with wireless n 300 router

Hide thumbs Also See for DSL-2740B:

Table of Contents

Appendix A - Networking Basics

Networking Basics

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless

router) automatically. To verify your IP address, please follow the steps below.

Click on Start > Run. In the run box type cmd and click OK.

At the prompt, type ipconfig and press Enter.

This will display the IP address, subnet mask, and the default

gateway of your adapter.

If the address is 0.0.0.0, check your adapter installation, security

settings, and the settings on your router. Some firewall software

programs may block a DHCP request on newly installed

adapters.

If you are connecting to a wireless network at a hotspot (e.g.

hotel, coffee shop, airport), please contact an employee or

administrator to verify their wireless network settings.

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Table of Contents