Section 7 - Advanced Setup
Bridge Filtering Setup
Bride Filtering is only effective on ATM PVC's configured in Bridge mode. MAC filtering can forward or block traffic by MAC address. You can change
the policy or add settings to the MAC filtering table using the MAC Filtering Setup screen.
If you want to add an entry to the MAC filtering table, Select Add from the MAC
Filtering Setup screen. The Add MAC Filter screen should then appear. Select a
Protocol Type, enter the Destination and Source MAC address, the necessary
Frame Direction, and WAN interface (bridge mode only). Click Apply to save.
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
58