Advertisement
In the Service Mode, select
control
and press to confirm.
The calibration status (e.g.
) are displayed. After completing calibration, the street in which you
are currently driving is displayed (provided that it is digitised) instead
of
and
.
A test program automatically tests the internal components of the navi-
gation system.
In the Service Mode, select
control
and press to confirm.
If
is displayed, press the
Service Mode.
•
In the Service Mode, select
control
and press to confirm.
•
Move the vehicle several metres forwards or backwards for the
GAL signal function test.
)
The number after
speed).
The number after
pressing the accelerator when the vehicle is parked.
Subject to correction and technical modifications
using the right rotary
) and the type of positioning (e.g.
using the right rotary
button. The unit switches back to the
using the right rotary
should increase (even at a low
should not increase if idling or
44
Copyright by Becker GmbH, D-76303 Karlsbad
Advertisement
