Advertisement
Deleting the calibration:
If the navigation system is removed from one vehicle and installed in
another, it must be calibrated. However, to do so, the current calibration
data must be deleted.
In the Service Mode, select
control
and press to confirm.
Using the right rotary control
The calibration is deleted and the unit returns to the Service Mode.
Calibration setting:
)
It is possible to provide calibration settings.
In the Service Mode, select
control
and press to confirm.
Using the right rotary control
Unit rotation can be selected in degrees by turning the right rotary
control
and pressing to confirm.
Subject to correction and technical modifications
using the right rotary
select
and press to confirm.
using the right rotary
select
and press to confirm.
41
Copyright by Becker GmbH, D-76303 Karlsbad
Advertisement
