Changing Between Fahrenheit And Celsius; Interior Lights - Baumatic BFW440 Instruction Manual

o Each time you press either the
of a particular zone will adjust by one degree. If you press and
hold down either the
by one degree every half a second.
o The button will increase the temperature of a zone. The
button will decrease the temperature of a zone.
o Whilst you are setting the temperature of a zone, the
corresponding temperature display will flash. When you stop
pressing the temperature buttons, after 3 seconds the display
will stop flashing and the temperature of the zone will be set.
o The display will then show the temperature that is currently
being registered by the cooling zone.
o The upper fan neon (3) and lower fan neon (8) will light
periodically to show that the fans inside of the wine cooler are
operating.

Changing between Fahrenheit and Celsius

o You can set the displays to show either Fahrenheit or Celsius. To
switch between Fahrenheit and Celsius, you need to use the
zone temperature buttons.
o Press the and
change. If you hold down the buttons for approximately 3
seconds, the display will change from Fahrenheit to Celsius or
vice versa.
o If you alter one display, then it will not change the other display,
so you will need to follow the above procedure for the upper and
the lower display.
o You cannot change the display if you are in the process of
adjusting the temperature of a cooling zone (i.e. the displays are
flashing).

Interior lights

o To operate the interior lights, you should use the light on/off
button (1).
o You cannot operate the interior lights if you are in the process of
adjusting the temperature of a cooling zone (i.e. the displays are
flashing).
or
or button, the temperature will adjust
buttons of the display that you want to
button, the temperature
12