Setting A Wash Program; Changing A Wash Program - Baumatic BFD40W Instruction Manual

* The wash program times that are quoted are intended as a guide
only. Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure etc. can affect
the time it takes for the wash program to complete.
** Normal is the testing program for EN 50242.

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Close the door firmly, so that you hear the door lock click shut.
o Turn the appliance on by using the ON/OFF button.
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button to choose an appropriate
wash program for the load that you are washing. The program
indicator lights will show you which wash program you have
currently selected.
o Press the Start/Reset button and the program indicator light will
start to blink next to the wash program that you have selected.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
o Press and hold the Start/Reset button for longer than 3 seconds.
o The program indicator light will stop blinking.
o Use the program selection button to select a new wash program.
20