Air Bags; Medical Devices - Kyocera G2GO M2000 User Manual

Hide thumbs Also See for G2GO M2000:
Table of Contents

Advertisement

Tests for SAR are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section www.fcc.gov/oet/ea after searching on the
FCC ID: OVF-K4802.
Additional information on SAR can be found on the Cellular
Telecommunications and Internet Association (CTIA) web-site at
www.ctia.org.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to
account for any variations in measurements.
Bluetooth® Certification
For information about M2000 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
qualweb.bluetooth.org.
User Guide
Caution
The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the
warranty and user's authority to operate the equipment.
Optimize your Phone's Performance
Use the guidelines in this guide to learn how to optimize the
performance and life of your phone and battery.

Air Bags

If you have an air bag, DO NOT place installed or portable phone
equipment or other objects over the air bag or in the air bag
deployment area. If equipment is not properly installed, you and
your passengers risk serious injury.

Medical devices

Pacemakers—Warning to pacemaker wearers: Wireless phones,
when in the 'on' position, have been shown to interfere with
pacemakers. The phone should be kept at least six (6) inches
away from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow these
guidelines to minimize the potential for interference.
Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
Hearing aids—Some digital wireless phones may interfere with
hearing aids. In the event of such interference, you may want to
consult your service provider or call the customer service line to
discuss alternatives.
Other medical devices—If you use any other personal medical
device, consult the manufacturer of the device to determine if it is
adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities—Turn your phone off in health care
facilities when instructed. Hospitals and health care facilities may
be using equipment that is sensitive to external RF energy.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents