Call Features; Power Phone Up; Make Phone Calls; Answer Phone Calls - Kyocera G2GO M2000 User Manual

2

Call Features

This section describes the basic features related
to calls.

Power Phone Up

• To turn your phone on, press the End key
and wait until the phone display lights up.
• To turn your phone off, press and hold the
End key until the phone plays a short
musical sound and turns off.

Make Phone Calls

Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars, the stronger
the signal. If there are no bars, move to where
the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
18
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see "Voice
Commands" on page 82.
Redial a Number
1. Press the Send key to open your call history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called, received
or missed, press the Send key twice.

Answer Phone Calls

When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller
also appears if it is not restricted. If the number
is stored in your contacts list, the contact's name
appears. There are several ways you can answer
a phone call.
Answer Using Earpiece
Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.
Power Phone Up