Add Contacts; Use Contacts - Kyocera G2GO M2000 User Manual

Use Fast Find
With Fast Find enabled, you can press one or
two keys to view close matches of the contact.
See "Call Contact using Fast Find" on page 72.

Add Contacts

Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
2. Select Save > Save New Contact.
3. Enter a name for the contact.
4. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
5. When done, select Save.
Add Contacts from Contacts Menu
1. From Add New, enter a name for the
contact. Scroll down to the next field when
done.
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
4. When done, select Save.
26
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause for
dialing an extension.
1. From the home screen, enter a phone
number.
2. Select Options and a type of pause:
– Time Pause causes the phone to stop
dialing for two seconds.
– Hard Pause causes the phone to wait
until you select Release while making
the call.
3. Enter the remaining numbers and select
Save > Save New Contact.
4. Complete the contact information and select
Save.

Use Contacts

Call Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number.
3. Select Call.
Send a Text Message to Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number or email address.
3. Select Send Text Msg.
4. Complete your text message and select
Send.
Add Contacts