End Phone Calls; Activate Voice Dialing; Volume Control; Use Speed Dialing - Kyocera G2GO M2000 User Manual

End Phone Calls

Press the End key.

Activate Voice Dialing

1. Press and hold the Send key.
2. Follow the prompts.
For more information, see "Voice Commands"
on page 82.

Volume Control

Adjust Volume during a Call
Press the Volume key up or down to adjust the
earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key
during an incoming call, you will answer the
call.
User Guide
Silence an Incoming Call
• To silence the phone without answering the
call, press the Back key or press the Volume
key up or down.
• To silence the phone and answer the call,
press the Back key or press the Volume key
up or down and then press the Send key.

Use Speed Dialing

Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See "Assign Speed Dials to
Contacts" on page 28.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
2. Press the Send key.
19