Generator/Welder Operation - Honda EXW171S Owner's Manual

Generator/welder
Hide thumbs Also See for EXW171S:
Table of Contents

Advertisement

Counn@ctions for standby
powsr~ to a bui8dinag's enectrican systc?m
must be made by a qu.naRiffied e0ecUrician aund rvwst compPy with
aQU
appBicabPe
laws arid electrica
codes. Uunnproper conndctions
can allow
electrical
cur-
rent
from the geuneraton to bad&m!
into %Bae utility $ims. Such
backfeed
may e8ectrocute
utility
company workers or others who contact the lines
during a power outage, and whew
utility
dower
is restored,
the generator
may expbde,
bum, or cause
fires
in the building's
dectrical
system.
Auto-throttle
System
With the switch in the AUTO position, engine speed is automatically
reduc-
ed to an idle when all loads are turned off or disconnected.
When ap-
pliances are turned on or reconnected,
the engine resumes the rated speed.
At OFF, the auto-throttle
system does not, operate.
NOTE:
l
AUTO is recommended
to minimize fuel consumption
when no load is
applied.
l
To avoid extended
warm-up
periods, keep the AUTO switch OFF until
'
the engine reaches operating temperature.
l
The auto-throttle
system will not respond to electrical loads of less than
1 ampere.
l
The system is not-effective
for use with an appliances that require only
momentary
power.
i
AU
D-THROTTLE
SWITCH
16

Advertisement

Table of Contents
loading

Table of Contents