Download  Print this page

Electrolux Thermaline 9CHG584138 Installation And Operating Instructions Manual page 14

Pasta cooker, gas
Hide thumbs

Advertisement

4.
MALFUNCTION
Malfunction
Possible cause
Pasta Cooker overheats;
• Water level too low.
the power is too weak.
Flame smokes.
• Gas mix too rich.
• Partially blocked burner
gaps.
Long yellow flame tips
• Mixing tube narrowed by
dirt.
Flame lifts off.
• Exit velocity too high due
to blocked burner gaps.
• Pressure regulator on
gas cylinder not
operating correctly.
Flame flashes back.
• Mixture too lean.
• Insufficient exit velocityat
burner gaps.
• Soiled airways
• Blocked nozzle.
No flame or flame too
• Blocked nozzle or mixer
small.
tube
• Blocked gas tap.
• No gas.
• Insufficient gas
pressure.
No flame at low setting.
• Blocked low setting
nozzle.
Pilot burner
No flame.
• Blocked burner gaps.
• Blocked nozzle.
Flame goes out after
• Thermo-element
control valve release.
insufficiently heated
(dirty?)
• Defective thermo-
element
• Defective pilot burner
Flame too small or too
• Primary air ratio
large.
adjusted.
• Nozzle blocked.
Page 12
OPERATING INSTRUCTIONS
Remedy
- Top up with water.
- Inform Customer
Service.
- Inform Customer
Service.
- Inform Customer
Service.
- Inform Customer
Service.
- Inform Customer
Service.
- Check gas tap setting.
- Inform Customer
Service.
- Clean pilot burner cap.
- Remove dirt; do not use
abrasive paper!
- Inform Customer
Service.
- Inform Customer
Service.
62.9680.01_UL

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux Thermaline 9CHG584138