Configuring Proxy Agent Objects - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Ad ding DEFINITY G3 Proxy Agent Nodes
9. This step is optional. You can change the contents of the Selection
Name field (populated when you completed step 6.)
!
CAUTION:
The Selection Name is a key field that must match the SNMP
configuration name.
If you choose to change this field, follow these guidelines:
a. Enter a name that matches the SNMP configuration name.
b. Do not use spaces in this field.
10. Click OK, located at the bottom of the window.
Result: The Add Object Pallet window redisplays.
11. Repeat steps 3 through 9 for each additional Proxy Agent.
12. On the Add Object Pallet window, click OK.
Result: The Add Object Pallet window closes and the network map
redisplays with the newly added Proxy Agent icon.

Configuring Proxy Agent Objects

A G3 Proxy object cannot receive any data until it is configured
appropriately. To create the appropriate configuration, complete the
following steps. Start on the network map that displays after you finished
the preceding procedure.
1. From the menu bar, select Options, then select SNMP
Configuration.
Result: The SNMP Configuration window opens. Existing nodes are
listed at the top of the window.
2. Ensure that the Use Proxy to access Target button is turned off.
Issue 1 October 1995
3-9