Telnetting To The Proxy Agent; Overview Of The Proxy Agent - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Integration for at&t onevision

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Telnetting to the Proxy Agent

This appendix provides the following information about how to telnet to the

Proxy Agent:

Why you need access to the Proxy Agent

Instructions on how to telnet

CAUTION:

Telnet is not a secure protocol; logins and passwords are not

encrypted before they are transmitted. To protect your logins and

passwords, perform the following actions only on a secure LAN:

Overview of the Proxy Agent

The OneVision DEFINITY G3 Proxy Agent (referred to as the Proxy Agent),

which is part of your OneVision network management package, is a

separate software application running on a separate computer from Fault

Management and the NMS. The purpose of the Proxy Agent is to translate

PBX data from DEFINITY's OSSI (Operating Support System Interface) into

Logging into the Proxy Agent

Using enhanced cut-throughs for PBX administration

Issue 1 October 1995

B-1

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?