Sleep Timer Operation - Fujitsu AWTZ14LBC Operating Manual

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.
To Use the SLEEP timer
While the air conditioner is operating or stopped, press the
SLEEP button (Fig. 5 `).
Each time the button is presssd, the time changes in the following order:
→ 1.0 → 2.0 → 3.0 → 5.0
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 2 6) and the TIMER Indica-
tor Lamp (green) (Fig. 2 5) light.
To Change the Timer Settings
Press the SLEEP button (Fig.5 `) once to display the last set-
ting time.
Press the SLEEP button (Fig.5 `) again to change the time.
Each time the button is pressed, the time changes in the following order (Change
from the last setting time):
→ 1.0 → 2.0 → 3.0 → 5.0 → 7.0 → 9.0(hour)
Confirmation of TIMER's time
The left time of the TIMER which is being set currently will be displayed for 5 min-
utes.
→ 7.0 →
9.0(hour)
(RESET)
(RESET)
To Cancel the Timer:
Press the CANCEL (TIMER) button.
To Stop the Air Conditioner During Timer
Operation:
Press the START/STOP button.
12