ECS 661GX-M7 Manual page 60

54
Create RAID
•
Creating a RAID 0 (Stripe) Array for Performance
•
•
To create an array for best performance, follow these steps:
1
2
3
4
SIS 964 controller support RAID 0, RAID 1 and JBOD.
SIS 180 enables users to create striped arrays with 2, 3, or 4 drives.
SIS 964 only supports 2 SATA drivers to create a stripe array.
Press <A> to start creating a RAID array.
Press <2> and <Enter> to select RAID 0.
You will have two selections to create a RAID 0 array. The default value is
<1>. If you select <1>Auto Create, you can create a RAID 0 array faster and
easier. The Blocksize will be selected by its default value "64K". The result
after creating will be show on step 8. Besides, you also can select <2>Manual
Create, see following steps.
Press <1>-<5> keys and <Enter> to select Block Size. (Default:64K)
SiS964 SATA RAID Setup Guide