AT&T MERLIN LEGEND MLX-10 Non-Display Telephone User Manual page 96

Features
To Program a Signal Button
1. Label button to be programmed as Signal–(name).
2. Press Feature and dial 00.
3. Press button you labeled Signal–(name).
4. Dial 23.
5. Dial co-worker's extension.
6. Press Feature and dial
To Use Signaling
Press programmed Signal–(name) button without lifting handset. If
you are on a call, just press Signal–(name) button.
Your co-worker's phone beeps.
To Use Signaling for Auto Dial
1. Press any ICOM or SA button. See Note.
2. Lift handset or press Speaker.
3. Press programmed Signal–(name) button.
The extension is dialed automatically.
Note: To make a voice-announced call, press ICOM Voice
or SA Voice. To make a ringing call, press ICOM Ring or
SA Ring.
5-50
Signaling and Notify
00.