AT&T MERLIN LEGEND MLX-10 Non-Display Telephone User Manual page 49

Features
To Enter an Account Code Before Calling
1. Press programmed Account Code button, or press Feature and
dial 82.
2. Dial account code followed by #. See Notes.
3. Press outside line or SA button.
4. Lift handset or press Speaker.
5. Dial phone number (including dial-out code if using SA button).
Notes:
For step 2, if you have programmed an outside Auto Dial
button with a specific account code followed by #, you can
press the button whenever you need to enter the code. (See
Auto Dial.)
If you are using account codes on a conference call, follow
steps 1–5 and press Conf. When adding additional
participants, repeat steps 1, 2, 3, and 5 and press Conf
again.
To Enter or Change Account Codes During a Call
1. Press programmed Account Code button, or press Feature and
dial 82.
2. Dial account code followed by #.
Notes:
Your caller does not hear you enter the account code.
If you make a mistake, you can correct the code using the
above procedure.
If an account code was already entered for a call when the
call arrived, you cannot change it.
Account Code Entry
5 - 3