Adjusting The Desk Stand - AT&T MERLIN LEGEND MLX-10 Non-Display Telephone User Manual
Non-display telephone
Hide thumbs
Also See for MERLIN LEGEND MLX-10 Non-Display Telephone:
- User manual (148 pages) ,
- Quick reference manual (9 pages)
Table of Contents
Advertisement
Your MLX-10 Telephone
Adjusting the Desk Stand
The angle of a desktop phone can be adjusted. Put the phone
face down on a flat surface, remove the cord from the clips in
the stand, and follow the steps below.
1. Press on the top rear center of the stand to release the tab.
2. Pull the stand toward you and away from the phone.
3 .
To adjust the stand to the low position, insert the tab at the
bottom of the stand into the corresponding lower slot. To
adjust the stand to the high position, insert the tab at the
bottom of the stand into the corresponding upper slot.
4 .
Lower the stand and press the tab at the top into the
corresponding slot on the phone. Replace the cord in the
clips in the stand.
Press
& Lift
Adjusting the Desk Stand
1 - 1 3
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND MLX-10 Non-Display Telephone and is the answer not in the manual?
Questions and answers