Maintenance And Inspection - Hitachi RB 18DLP4 Instruction Manual

MAINTENANCE AND INSPECTION

CAUTION:
Pull out battery before doing any inspection or maintenance.
1. Check the Screws
Loose screws are dangerous. Regularly
inspect them and make sure they are tight.
CAUTION:
Using this blower with loosened, screws is
extremely dangerous.
2. Maintenance of the motor
The motor unit winding is the most important
part of the blower.
Exercise due care to ensure the winding does
not become damaged and/or wet with oil or
water.
3. Check for Dust
Dust may be removed with a soft cloth or a
cloth dampened with soapy water.
Do not use bleach, chlorine, gasoline or
thinner, for they may damage the plastics.
4. Storage
Storing in a place below 104°F (40°C) and out
of the reach of children.
5. Service and repairs
All quality blower will eventually require
servicing or replacement of parts because of
wear from normal use. To assure that only
authorized replacement parts will be used, all
service and repairs must be performed by a
HITACHI AUTHORIZED SERVICE CENTER,
ONLY.
6. Service parts list
CAUTION:
Repair, modification and inspection of Hitachi
Blower must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with
the blower to the Hitachi Authorized Service
Center when requesting repair or other
maintenance. In the operation and
maintenance of blower, the safety
regulations and standards prescribed in each
country must be observed.
MODIFICATIONS:
Hitachi Blower is constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed
without prior notice.
English
11