Integrated Peripherals - Gigabyte GA-X58A-UD3R User Manual

2-6

Integrated Peripherals

eXtreme Hard Drive (XHD)
ICH SATA Control Mode
SATA Port0-3 Native Mode
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Mouse Function
USB Storage Function
Azalia Codec
Onboard H/W 1394
Onboard H/W LAN
Green LAN
 SMART LAN
Onboard LAN Boot ROM
Onboard USB 3.0 Controller
eSATA Controller
eSATA Ctrl Mode
GSATA 6_7/IDE Controller
GSATA 6_7/IDE Ctrl Mode
higf : Move Enter: Select
F5: Previous Values
SATA3 Firmware Selection
GSATA RAID Configuration
GSATA 8_9/IDE Controller
GSATA 8_9/IDE Ctrl Mode
higf : Move Enter: Select
F5: Previous Values
eXtreme Hard Drive (Intel ICH10R South Bridge)
Enables or disables the X.H.D function for the SATA controllers integrated in the Intel ICH10R South
Bridge. When set to Enabled, the ICH SATA Control Mode item below will be set to RAID(XHD) au-
tomatically. For details on using the GIGABYTE X.H.D utility, refer to Chaper 4, "eXtreme Hard Drive
(X.H.D)." (Default: Disabled)
ICH SATA Control Mode (Intel ICH10R South Bridge)
Enables or disables RAID for the SATA controllers integrated in the Intel ICH10R South Bridge or config-
ures the SATA controllers to AHCI mode.
IDE
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables RAID for the SATA controllers and configures the SATA controllers to IDE
mode. (Default)
[Disabled]
[IDE]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[IDE]
[Enabled]
[IDE]
F10: Save
[Onchip]
[Press Enter]
[Enabled]
[IDE]
F10: Save
- 53 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup