Gigabyte GA-X58A-UD3R User Manual page 114

• Restoring the Master Drive to a Previous State (for Recovery Volume only)
When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master
drive data to the last backup state when needed. For example, in case the master drive detects a virus, you
can restore the recovery drive data to the master drive.
Step 1:
Select 4. Recovery Volume Options in the MAIN MENU of the ICH10R RAID Configuration Utility. On the
RECOVERY OPTIONS menu, select Enable Only Recovery Disk to show the recovery drive in the operat-
ing system. Follow the on-screen instructions to complete and exit the RAID Configuration Utility.
Name
Volume0

Step 2:
Enter the operating system, launch the Intel Matrix Storage Console from All Programs in the Start menu,
and select Advanced Mode. Right-click on the recovery volume and select Recover Data to Master.
Step 3:
To check the recovery status, right-click on the recovery volume and select Show Recovery Progress. When
a dialog box indicating that the recovery is completed appears, click OK to complete.
Appendix
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation. All Rights Reversed.
[ RECOVERY VOLUME OPTIONS ]
1. Enable Only Recovery Disk
2. Enable Only Master Disk
[ SELECT RECOVERY VOLUME
Level
Recovery(OnReq)
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Select a Recovery volume to do the operation.
Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror.
RAID5: Stripes data and parity.
[ hi ]-Up/Down [SPACE]-Selects [ENTER]-Done
[ hi ]-select
[ HELP ]
Capacity
111.7GB
Choose the RAID level:
[ESC]-Previous Menu
- 114 -
]
Status Bootable
NeedsUpdate Yes
[ENTER]-Select