Gigabyte GA-X58A-UD3R User Manual page 118

Step 3:
The BGA Rebuild item in the Information block will display the current rebuild progress. After the rebuild is
complete, the Status will display as Functional. Please note the rebuild will be stopped if you exit the rebuild
screen before the rebuild is complete.
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 8: WDC WD800JD-22L
Free Physical Disks
Help
Virtual Disk: A set of disk blocks presented to an operating environment as
a range of consecutively numbered logical blocks with disk-like storage.
ENTER: Operation F10: Exit/Save ESC: Return
Resume the Stopped Rebuild Process
To resume the stopped rebuild process, enter the GSATA RAID Configuration menu in BIOS Setup again.
Move the selection bar to the array to be rebuilt (for example, VD 0: New_VD). Press <Enter> on this array
and select Resume. Press <Enter> again to continue the rebuild process. Note that the percentage of the last
rebuild progress will be rounded down to the nearest multiple of 10 percent (as shown in the BGA Rebuild
item). For example, if you stopped the rebuild at 27%, the rebuild will continue at 20%.
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 8: WDC WD800JD-22L
Free Physical Disks
Help
Virtual Disk: A set of disk blocks presented to an operating environment as
a range of consecutively numbered logical blocks with disk-like storage.
ENTER: Operation F10: Exit/Save ESC: Return
Appendix
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Information
ID
Name
Status
Stripe Size
RAID Mode
Size
BGA Status
BGA Rebuild
Number of PDs
Numbers
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Information
ID
Name
Status
Stripe Size
[Delete]
RAID Mode
[Resume]
Size
BGA Status
BGA Rebuild
Number of PDs
Numbers
: 0
: New_VD
: Degrade
: 64K
: RAID1
: 75776MB
: Running
: 27%
: 2
: 0 8
: 0
: New_VD
: Degrade
: 64K
: RAID1
: 75776MB
: Running
: 20%
: 2
: 0 8
- 118 -