Gigabyte GA-X58A-UD3R User Manual page 109

Step 3:
When a screen as shown in Figure 7 appears, select Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID
Controller and click Next.
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and
then click Next to continue the OS installation (Figure 8).
The install menus described in this chapter are for reference only and may differ by driver version.
Figure 7
Figure 8
- 109 - Appendix