Table of Contents
Advertisement
C6 State (Enabled)
Nehalem C state action select.
C1 Auto Demotion (Enabled)
When enable, CPU will conditionally demote C3/C6/C7 requests to C1 based onuncore
auto-demote information.
C3 Auto Demotion (Enabled)
When enable, CPU will conditionally demote C6/C7 requests to C3 based on
uncoreauto-demote information.
ACPI T State (Enabled)
Report processor throttling in ACPI
EUP Support (Enabled)
When enabled, system can not resume by some devices (PCI/PCIE/PME/Ring/RTC,etc)
at S5 state. You can use this item to save power.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Init Display First
: Move
Enter : Select
F1:General Help
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
PCI
Select which
graphics controller
to use as the primary
boot device.
F10: Save
ESC: Exit
+/-/: Value
F9: Optimized Defaults
Using BIOS
37
Help Item
Options
Hide quick links:
Advertisement
Table of Contents
