Integrated Peripherals - ECS H57H-M Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
Onboard SATA2 Controller
Onboard AUDIO Function
Onboard LAN1 Function
Onboard LAN2 Function
Onboard LAN Boot ROM
USB Functions
Legacy USB Support
: Move
F1:General Help
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options: IDE, RAID, AHCI or
Disabled.
Onboard SATA Mode (AHCI)
Use this item to select the SATA mode.
Onboard SATA2 Controller (IDE Mode)
Use this item to select the mode of the Onboard SATA2 Controller.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
OnBoard LAN1 Function (Enabled)
Use this item to enable or disable the onboard LAN1 function.
OnBoard LAN2 Function (Enabled)
Use this item to enable or disable the onboard LAN2 function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
IDE
Enabled
IDE Mode
Enabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enter : Select
+/-/: Value F10: Save
F9: Optimized Defaults
Using BIOS
Help Item
Options
IDE
RAID
AHCI
Disabled
ESC: Exit
35