Advertisement

Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 1.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability or fitness for
any particular purpose. The manufacturer reserves the right to revise this publica-
tion and to make changes from time to time in the content hereof without obligation
of the manufacturer to notify any person of such revision or changes.
Trademark Recognition
®
Windows
7/8 are registered trademarks of Microsoft Corp.
Other product names used in this manual are the properties of their respective owners
and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits govern-
ing this device. Changes or modifications not expressly approved by the system's
manufacturer could void the user's authority to operate the equipment.
H110M-C3V/H110M-C3D USER MANUAL
Preface

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H110M-C3V and is the answer not in the manual?

Questions and answers

Summary of Contents for ECS H110M-C3V

  • Page 1 Shielded interconnect cables and a shielded AC power cable must be employed with this equipment to ensure compliance with the pertinent RF emission limits govern- ing this device. Changes or modifications not expressly approved by the system’s manufacturer could void the user’s authority to operate the equipment. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 2: Declaration Of Conformity

    Chapter 3 Provides information page 29 Using BIOS using the BIOS Setup Utility.  Chapter 4 Describes the motherboard page 61 Using the Motherboard Software software.  Chapter 5 Provides basic trouble page 67 Trouble Shooting shooting tips. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 3: Table Of Contents

    Using BIOS About the Setup Utility..............29 The Standard Configuration............29 Entering the Setup Utility............29 Resetting the Default CMOS Values........30 Using BIOS..................31 BIOS Navigation Keys..............31 Main Menu................33 Advanced Menu..............34 Chipset Menu................45 Tweak Menu................52 Security Menu................57 Boot Menu................58 Exit Menu................59 H110M-C3V/H110M-C3D USER MANUAL...
  • Page 4 Using the Motherboard Software Auto-installing under Windows 7/8..........61 ..Running Setup..............62 Manual Installation................64 ECS Utility Software (Intelligent EZ Utility)........64 Chapter 6 Trouble Shooting Start up problems during assembly..........67 Start up problems after prolong use..........68 Maintenance and care tips..............68 Basic Troubleshooting Flowchart...........69...
  • Page 5: Introducing The Motherboard

    Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the H110M-C3V/H110M-C3D motherboard. This motherboard is a high performance, enhanced function motherboard designed to support the ® LGA1151 socket for Intel Skylake processor. ® This motherboard is based on Intel H110 Express Chipset for best desktop platform solution.
  • Page 6: Specifications

    Specifications ® • LGA1151 socket for Intel Skylake processor • Supports CPU up to 95W, TDP up to 95W Note: Please go to ECS website for the latest CPU support list. ® Chipset • Intel H110 Chipset Memory • Dual-channel DDR3L memory architecture •...
  • Page 7 Add the function of copying BIOS parameters to USB flash drive AP Support • Supports eBLU* /eDLU/eSF* /Cyberlink Media Suite* Note: Microsoft .NET Framework 3.5 is required. Free bundle software including ECS DVD: Cyberlink Media Suite. Form Factor • Micro ATX Size, 225mm x 170mm H110M-C3V/H110M-C3D USER MANUAL...
  • Page 8: Motherboard Components

    Motherboard Components H110M-C3V H110M-C3V/H110M-C3D USER MANUAL...
  • Page 9 H110M-C3D H110M-C3V/H110M-C3D USER MANUAL...
  • Page 10 PCI Express Gen2 x1 slot 16. USB3F Front panel USB 3.0 header 17. PCIEX16 PCI Express x16 slot Gen3 for graphics interface 18. SYS_FAN 4-pin system cooling fan connector 19. CLR_CMOS Clear CMOS jumper 20. ATX_12V 4-pin +12V power connector H110M-C3V/H110M-C3D USER MANUAL...
  • Page 11: I/O Ports

    LAN Port 7. USB 2.0 Ports Use the USB 2.0 ports to connect USB 2.0 devices. 8. Line-in (blue) It can be connected to an external CD/DVD player, Tape player or other audio devices for audio input. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 12 9. Line-out (lime) It is used to connect to speakers or headphones. 10.Microphone (pink) It is used to connect to a microphone. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 13: Installing The Motherboard

    Place the motherboard over the mounting brackets and secure the motherboard onto the mounting brackets with screws. Do not over-tighten the screws as this can stress the motherboard. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 14: Checking Jumper Settings

    The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. To avoid the system instability after clearing CMOS, we recommend users to enter the main BIOS setting page to “Load Default Settings” and then “Save and Exit Setup”. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 15: Installing Hardware

    Lift the tail of the load lever and rotate the load plate to fully open position. Grasp the edge of the package substrate. Make sure pin 1 indicator is on your bottom-left side. Aim at the socket and place the package carefully into the socket by purely vertical motion. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 16 Spreader). Engage the load lever while pressing down lightly onto the load plate. Secure the load lever with the hook under retention tab. Then the cover will flick automatically. Please save and replace the cover onto the CPU socket if processor is removed. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 17: Installing The Cpu Cooler

    B. Fasten the cooling fan supporting base onto the CPU socket on the motherboard. And make sure the CPU fan is plugged to the CPU fan connector. C. Connect the CPU cooler power connector to the CPU_FAN connector. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 18: Installing Memory Modules

    The slot latches are levered upwards and latch on to the edges of the DIMM. We suggest users not to mix memory type. It is recommended to use the same brand and type memory on this motherboard. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 19: Installing Add-On Cards

    The PCI Express x1 slot is fully compliant to the PCI Express Base PCIEX1 Specification revision 2.0. Before installing an add-on card, check the documentation for the card carefully. If the card is not Plug and Play, you may have to manually configure the card before installation. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 20 Please refer the following illustrations to install the add-on card: Install the LAN Card in the PCIEX1 slot Install the VGA Card in the PCIE X16 slot H110M-C3V/H110M-C3D USER MANUAL...
  • Page 21: Connecting Optional Devices

    SATA1~4 connectors are used to support the Serial ATA 6Gb/s device, simpler disk drive cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA interface. But maintains register compatibility and software compatibility with Parallel ATA. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 22 2. TPM: Trusted Platform Module Header Trusted platform module (TPM) is a published specification detailing a microcontroller that can store secured information, and implementations of that specification. 3. ME_UNLOCK: ME Unlock Header H110M-C3V/H110M-C3D USER MANUAL...
  • Page 23 Please make sure that the USB cable has the same pin assignment as indicated above. A different pin assignment may cause damage or system hang-up. 5. COM: Onboard Serial Port Header Connect a serial port extension bracket to this header to add a serial port to your system. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 24 97 Front Panel, please tick off the option of “ Disabled Front Panel Detect ”. If you use HD Audio Front Panel, please don’ t tick off “Disabled Front Panel Detect ” . * For reference only H110M-C3V/H110M-C3D USER MANUAL...
  • Page 25 ”. * For reference only 7. CASE: Chassis Intrusion Detect Header This detects if the chassis cover has been removed. This function needs a chassis equipped with instrusion detection switch and needs to be enabled in BIOS. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 26 This Motherboard implements one USB 3.0 header supporting 2 extra front USB 3.0 ports, which delivers 5Gb/s transfer rate. Please make sure that the USB cable has the same pin assignment as indicated above. A different pin assignment may cause damage or system hang-up. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 27: Installing A Sata Hard Drive

    Attach either cable end to the connector on the motherboard. Attach the other cable end to the SATA hard drive. Attach the SATA power cable to the SATA hard drive and connect the other end to the power supply. * For reference only H110M-C3V/H110M-C3D USER MANUAL...
  • Page 28: Connecting Case Components

    2-4-7. Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: Components Components CPU_FAN ATX_POWER SYS_FAN F_PANEL ATX12V H110M-C3V/H110M-C3D USER MANUAL...
  • Page 29 Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V. 2. ATX_POWER (ATX 24-pin Power Connector) & 6. ATX12V (ATX 12V Power Connector) Connect the standard power supply connector to ATX_POWER. Connect the auxiliary case power supply connector to ATX12V. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 30: Front Panel Header

    4-pin power cable 3. F_PANEL: Front Panel Header The front panel header (F_PANEL) provides a standard set of switch and LED headers commonly found on ATX or Micro ATX cases. Refer to the table below for information: H110M-C3V/H110M-C3D USER MANUAL...
  • Page 31 After receiving a power on/off signal, at least two seconds elapses before the power supply recognizes another on/off signal. 4. BZ: Buzzer Header This concludes Chapter 2. The next chapter covers the BIOS. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 32 Memo H110M-C3V/H110M-C3D USER MANUAL...
  • Page 33: Using Bios

    When you power on the system, BIOS enters the Power-On Self Test (POST) routines. POST is a series of built-in diagnostics performed by the BIOS. After the POST routines are completed, the following message appears: Press DEL to enter SETUP H110M-C3V/H110M-C3D USER MANUAL...
  • Page 34: Resetting The Default Cmos Values

    Wrong” message. This standard message will appear following a clear CMOS data at factory by the manufacturer. You simply need to Load Default Settings to reset the default CMOS values. Note: Changes to system hardware such as different CPU, memories, etc. may also trigger this message. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 35: Using Bios

    BIOS Navigation Keys The BIOS navigation keys are listed below: FUNCTION Exits the current menu    Scrolls through the items on a menu  Change Opt. Enter Select General Help Previous Value Optimized Defaults Save & Exit H110M-C3V/H110M-C3D USER MANUAL...
  • Page 36 Select the advanced icon and press <Enter> or double click the left key of the mouse to display the screen. Exit Select the exit icon and press <Enter> or double click the left key of the mouse to display the screen. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 37: Main Menu

    The Date and Time items show the current date and time on the computer. If you are running a Windows OS, these items are automatically updated whenever you make changes to the Windows Date and Time Properties utility. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 38: Advanced Menu

    F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Onboard LAN Controller (Enabled) Use this item to enable or disable Onboard LAN controller. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 39: Pc Health Status

    F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Smart Fan Select (CPU Fan) This item allows you to change and configure Smart Fans on M/B. ex. CPU Fan, System Fan. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 40 • DIMM Voltage • +12V • +5VSB • +VCC Press <Esc> to return to the Advanced Menu page. TCC Activation Temperature (DTS) (100) This item is used to set the value from the factory TCC activation temperature. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 41: Power Management Setup

    EUP Function (Enabled) This item allows user to enable or disable EUP support. Power LED Type (Dual Color LED) This item shows the type of the Power LED. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 42: Acpi Settings

    F4: Save & Exit ESC/Right Click: Exit ACPI Sleep State [S3(Suspend to RAM)] This item allows user to enter the ACPI S3 (Suspend to RAM) Sleep State (default). Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 43: Cpu Configuration

    Use this item to control the number of active processor cores. Limit CPUID Maximum (Disabled) Use this item to enable or disable the maximum CPUID value limit, you can enables this item to prevent the system from “rebooting” when trying to install Windows NT 4.0. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 44 Package C State limit (AUTO) Use this item to set the package C state limit. Enhanced Halt (C1E) (Enabled) Use this item to enable or disable the Enhanced C1 state. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 45: Sata Configuration

    On an edge detect from 0 to 1, the PCH starts a COMRESET initialization sequence to the device. External SATA (Disabled) Use this item to enable or disable External SATA Support. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 46: Usb Configuration

    All USB Devices (Enabled) Use this item to enable or disable all USB devices. Legacy USB Support (Enabled) Use this item to enable or disable support for legacy USB devices. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 47: Super Io Configuration

    This item shows the information of the device settings. Change Settings (Auto) Use this item to change device settings. Press <Esc> to return to the Super IO Configuration page. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 48: Trusted Computing

    TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. Press <Esc> to return to the Advanced Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 49: Chipset Menu

    This item shows the information of the IGD (Internal Graphics Device) memory. DVMT Memory (256M) When set to Fixed Mode, the graphics driver will reserve a fixed position of the system memory as graphics memory, according to system and graphics requirements. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 50 Intel integrated Graphics and one or two PCI-Express graphics devices under Windows 7/8. Step 1. Insert ECS drives DVD to run Auto setup or browse the DVD to install Intel chipset drivers, VGA and sound drivers.(If you want know the detail information, please refer to chapter 4.)
  • Page 51 DVMT Memory 256M IGD Multi-Monitor Disabled  : Select Screen  /Click: Select Item Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit H110M-C3V/H110M-C3D USER MANUAL...
  • Page 52: Display Devices

    Extend desktop to this display You must select Apply before making additional changes. Disconnect this display Make this my main display Advance settings Make text and other items larger or smaller What display settings should I choose? Cancel Apply H110M-C3V/H110M-C3D USER MANUAL...
  • Page 53 Multiple displays: Extend desktop to this display You must select Apply before making additional changes. Make this my main display Advance settings Make text and other items larger or smaller What display settings should I choose? Cancel Apply H110M-C3V/H110M-C3D USER MANUAL...
  • Page 54: Pch Configuration

    This item enables or disables the warning if the case is opened up, and the item below indicates the current status of the case. Chassis Opened (No) This item indicates whether the case has been opened. Press <Esc> to return to the Chipset Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 55 1.2-Disables PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved on it will be lost. ME FW Version (11.0.0.1136) This item shows the ME FW version. Press <Esc> to return to the Chipset Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 56: Tweak Menu

    F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit EIST (Enabled) This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep Technology). Turbo Boost (Enabled) This item allows you to enable or disable turbo boost. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 57 Use this item to enable or disable the limit 3 override. If this option is disabled, BIOS will leave the default values for power limit 3 and power limit 3 time window. Press <Esc> to return to the CPU OverClocking Configuration page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 58 Use this item to enable or disable the limit 4 override. If this option is disabled, BIOS will leave the default values for power limit 4 and power limit 4 time window. Press <Esc> to return to the CPU OverClocking Configuration page. Press <Esc> to return to the Tweak Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 59: Memory Configuration

    This item enables you to set the memory profiles. The selection of memory profiles impacts memory sizing behavior. Memory Frequency (1067) This item shows the information of the memory frequency. Press <Esc> to return to the Tweak Menu page. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 60 This is display-only field and displays the information of the CPU installed in your computer. Processor Speed (2500 MHz) This item shows the CPU speed. Memory Frequency (1067 MHz) This item shows the memory frequency. Total Memory (1024 MB) This item shows the total memory. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 61: Security Menu

    Secure Boot state (Not Active) This item allows you to enable or disable the secure boot state. Secure Boot (Disabled) This item is used to control the secure boot flow, it is possible only if system runs in User Mode. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 62: Boot Menu

    Boot Option #1 /2 /3 /4 /5 /6 /7 /8 These items show the boot priorities. USB Flash Drive Priorities This item enables you to specify the sequence of loading the operating system. Press <Enter> to see the submenu. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 63: Exit Menu

    This item enables you to save the changes that you have made as user defaults. Restore User Defaults This item enables you to restore the user defaults. Boot Override Use this item to select the boot device. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 64 BIOS jumper, reset the jumper to protect the newly installed BIOS from being overwritten. The computer will restart automatically. This concludes Chapter 3. Refer to the next chapter for information on the software supplied with the motherboard. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 65: Using The Motherboard Software

    Auto-Setup window. Browse CD: Open Windows Explorer and show the contents of the support disk. Click “Setup” Click the “ Utilities” button to select and button to select and software install ECS Intelligent installation program. Utility. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 66: Running Setup

    The motherboard identification is located in the upper left-hand corner. Click Next. The following screen appears: Check the box next to the items you want to install. The default options are recommended. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 67 Windows 8 will show the following screen after system restart, you must select “Desktop” in the bottom left to install the next driver. H110M-C3V/H110M-C3D USER MANUAL...
  • Page 68: Manual Installation

    README.DOC) for information on installing the driver or software for your operating system. ECS Utility Software (Intelligent EZ Utility) ECS Intelligent EZ Utility provides friendly interfaces under Windows O.S, which makes your computing more easily and conveniently. These software(s) are subject to change at anytime without prior notice. Please refer to the support disk for available software.
  • Page 69 Just select the one you prefer and start to download and install the drivers. eBLU ECS eBLU utility makes BIOS update faster and easier. eBLU will list the latest BIOS with a default check-mark. Click”install” button to install. Microsoft .NET Framework 3.5 is required.
  • Page 70 Memo H110M-C3V/H110M-C3D USER MANUAL...
  • Page 71: Trouble Shooting

    Before calling for technical support or returning for warranty, this chapter may help to address some of the common questions using some basic troubleshooting tips. You may also log onto our ECS website for more information: http:// www.ecs.com.tw/ECSWebSite/Support/Support_FAQ.aspx?MenulD=49& childid=M 49&LanlD=0 a) System does not power up and the fans are not running.
  • Page 72: Start Up Problems After Prolong Use

    5. Check whether there is any bulked up electrolytic capacitor or abnormal component. Please logo onto our ECS website: http://www.ecs.com.tw/ECSWebSite/Support/ Technical_Support_List.aspx?MenuID=50&LanID=0 for more information. Maintenance and care tips Your computer, like any electrical appliance, requires proper care and maintenance.
  • Page 74 Memo H110M-C3V/H110M-C3D USER MANUAL...

This manual is also suitable for:

H110m-c3d

Table of Contents

Save PDF