Enter Button (Ir Control); Standby Button (Ir Control); Up/Down Buttons (Ir Control); Indicators - Barco LC-5621 User Manual

7.1.2.6

Enter button (IR control)

ENTER
Pressing this button enables the user to select/activate the menu item when the
OSD menu is activated.
7.1.2.7

Standby button (IR control)

Pressing this button puts the display in standby mode.
Standby mode means that the power to the LCD panel and backlight is disabled
and that all power consumption is reduced to a strict minimum. The display
turns black.
To bring the unit out of this mode, press the button again. Power is restored
immediately.
7.1.2.8

Up/down buttons (IR control)

Pressing this buttons will navigate the "cursor" through the OSD menu when
active or increase/decrease the selected value in the OSD.
7.1.3

Indicators

7.1.3.1

Location of the indicators

1
2

Figure 9: Location of the indicators

Barco - LC-5621 - User manual _______________________________________________________ 31
1
IR receiver
Power LED
2
Operation