Installation Instructions; Safety Instructions For The Installer - AEG COMPETENCE CB8920-1 Installation And Operating Instructions Manual

Installation Instructions

1
Important: The new appliance may only be installed and connected by
an approved specialist.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
1

Safety Instructions for the Installer

• A device must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3 mm.
Suitable isolation devices are, for example, circuit breakers, fuses
(screw-type fuses are to be removed from the holder), earth leakage
trips and contactors.
• The installation must guarantee shock protection.
• The stability of the unit in which the appliance is fitted must satisfy
the requirements of DIN 68930.
• Built-in ovens and hobs are fitted with special connector systems.
They may only be combined with appliances with a matching system.
74