Unpacking; Installation Instructions - AEG ZMB 32 CT Instruction Booklet

Combination oven
Table of Contents

Advertisement

Unpacking
When you unpack the oven, check that the product is free from damage (deformed door, etc.). Damage or any missing parts
must be reported immediately to the retailer. Dispose of packing material safely and keep away from children.
Installation Instructions
¢
Remove any labels from the door.
¢ If used as a free-standing appliance, make sure that air circulates
freely around the oven.
Leave sufficient space around the oven :
- 5 cm between the sides of the oven and any objects
- 20 cm above the oven
¢
The oven should be installed on a flat, level surface, away
from any direct source of heat or steam, and at least 85 cm
above ground. The surface must be strong enough to
safely bear the weight of the oven and the contents. To
avoid the possibility of causing vibration or noise, the oven
- 10 cm behind the oven.
must be in a stable position.
* Do not block air vents on the top and sides of the cabinet and do
not place any articles on the top of the oven, to avoid overheating.
¢ Place the oven as far away from radios and TV's
as
possible.
¢ This oven can be used as a free standing oven or built-
into a kitchen cabinet. Detailed below is a guide to the
building in dimensions. Detailed assembly instructions are
supplied with the building in kit.
This appliance conforms to the requirements of EEC radio inter-
ference directive 87/308/EEC.

Advertisement

Table of Contents
loading

Table of Contents