58
Installation Instructions
Installation Instructions
1
Attention: The new appliance may only be installed and connected by a regis
tered expert.
Please comply with this. If you do not, any damage resulting is not covered by
the warranty.
1
Safety information for the installer
• The electrical installation is to be set up so that the appliance can be isolated
from the mains with a minimum 3mm all pole contact separation.
Suitable separation devices include e.g. cut outs, fuses (screw fuses are to be
taken out of the holder), RCD's and contactors.
• Anti shock protection must be provided by the installation.
• The built in unit must meet the stability requirements of DIN 68930.
• Built in ovens and built in cooking surfaces are fitted with special connection
systems. For safety reasons, they must only be combined with appliances from
the same manufacturer.
All manuals and user guides at all-guides.com