Additional Functions - AEG COMPETENCE CB8920-1 Installation And Operating Instructions Manual

Additional Functions

Programmes
3
For this function, use the recipes supplied in the chapter "Programmed
Functions and Recipes".
Selecting programmes
1. Press the Programme
repeatedly until the desired pro-
gramme appears.
– In the Function Display the sym-
bol for the corresponding Oven
Function and the recommended
shelf position appear.
– The suggested temperature ap-
pears in the Temperature Dis-
play.
– The cooking time and the end of cooking time appear in the Time
Display.
– After about 5 seconds the oven is switched on.
– 10 minutes before the end of the programme an audible signal
sounds.
2. Check the cooking at this point.
3
Does not apply to Vigorous Steam!
– When the cooking time is completed, an audible signal sounds.
"0:00" flashes in the Time Display.
3. The signal can be stopped by pressing any button.
Delaying the start
The start of the cooking time can be delayed (see Clock Functions End
Time).
3
The Clock Function End Time can be set, if the programme has been
running for less than two minutes.
Ending the cooking time early
Press the Programme
displayed.
button
button repeatedly until no programme is
21