Trip Computer - Fiat Linea Owner's Handbook Manual

TRIP COMPUTER

General features
The "Trip computer" is used to display in-
formation on car operation when the key
is turned to MAR. This function allows to
define two separate trips called "Trip A"
and "Trip B" for monitoring the car's
"complete mission" in a reciprocally in-
dependent manner.
Both functions are resettable (reset - start
of new mission).
"Trip A" may be used to display the fig-
ures relating to:
– Range
– Distance travelled
– Average consumption
– Instant consumption
– Average speed
– Travel time (driving time).
42
"Trip B", available on multifunctional dis-
play only, shall be used to display the fig-
ures relating to:
– Trip distance B
– Average consumption B
– Average speed B
– Travel time B (driving time).
Note "Trip B" functions may be exclud-
ed (see "Trip B on"). "Range" and "In-
stantaneous consumption" cannot be re-
set.
Values displayed
Range
This indicates the distance which may be
travelled with the fuel in the tank
assuming that driving conditions will not
change. The message "——" will appear
on the display in the following cases:
– range shorter than 50 km (or 30 mi)
– car left parked with engine running for
long.
Distance travelled
This indicates the distance covered from
the start of the new mission.