If An Exterior Light Burns Out - Fiat Panda Owner's Handbook Manual

IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
fig. 21
FRONT LIGHT UNITS
To change the bulb, proceed as follows:
❒ release clip A-fig. 21 and remove cap
B;
❒ turn the bulb-holder C-fig. 22 and re-
move it (it is pressure-fitted);
❒ remove the burnt bulb E-fig. 23 and fit
the new bulb;
❒ refit by reversing the above mentioned
operations.
F0G0089m fig. 22
fig. 23
To change the direction indicator bulb,
proceed as follows:
❒ release clip A-fig. 21 and remove cap
B;
❒ turn the bulb-holder D-fig. 22 and re-
move it (it is pressure-fitted);
F0G0090m
F0G0091m
139