Fiat Panda Owner's Handbook Manual page 132

fig. 10
❒ fasten the three other bolts with the
wrench provided;
❒ lower the car and remove the jack;
❒ fasten bolts completely, working in a
criss-cross fashion as shown in fig. 10.
When you have finished
❒ arrange the space-saver spare wheel D-
fig. 3 in the specific compartment in the
boot;
❒ insert the partially open jack into the
container C and force it slightly into its
seat so that it does not vibrate when
the car is moving;
❒ put the tools back into their places in
F0G0696m
the container;
❒ stow the container complete with tools
on the spare wheel and secure every-
thing with the clamping device B;
❒ correctly reposition the boot stiff cov-
er.
IMPORTANT Do not use inner tubes
with tubeless tyres. Check the inflation
pressure of the tyres and the spare wheel
regularly.
IMPORTANT You will need to change the
set of bolts if you want to change the type
of wheels fitted (alloy rims instead of steel
rims, and vice versa). You will have to
change the entire set of fastening bolts
with another set of suitably sized bolts and
adopt a specific spare wheel having differ-
ent building characteristics.
You should keep the bolts and spare
wheel in case you decide to use the orig-
inal type of wheel later on.
131