Bonnet - Fiat Panda Owner's Handbook Manual

Hide thumbs Also See for Panda:
Table of Contents

Advertisement

fig. 80
Restoring the seat position
To restore the use of the rear seat: lift the
seat back and push it backwards until you
hear the locking click and make sure the
seat belts are at the front of the seat back.
WARNING
Once you have released the
lever, check that the seat is
firmly locked in the runners by trying
to move it back and forth. Failure to
lock the seat in place could result in
the seat moving suddenly and the dri-
ver losing control of the car.

BONNET

To open the bonnet fig. 81-82-83
Pull the red lever (under the dashboard)
as shown in the figure.
Lift lever A.
Open the bonnet and at the same time re-
lease the rod B from its clip C.
F0G0258m
Insert the end of rod in its recess D on
the bonnet and leave it in safety position.
WARNING
The bonnet might fall vio-
lently if the support rod is
not positioned properly. This should
only be done when the car is station-
ary.
fig. 81
fig. 82
F0G0202m
F0G0690m
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents