If An Exterior Light Burns Out - Fiat Bravo Owner's Handbook Manual

IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
FRONT LIGHT UNITS fig. 19
The front light units contain the side/ tail-
lights, dipped beam, main beam and di-
rection indicator bulbs.
The bulbs are arranged inside the light unit
as follows:
A Sidelights / main beam headlights;
B Dipped beam headlights;
C Direction indicators.
172
fig. 19
DIPPED BEAM HEADLIGHTS
Gas-filled filament lamps
To change the bulb, proceed as follows:
❒ remove the protective cover B-fig. 19;
❒ release the bulb holder catch A-fig. 20;
❒ disconnect the electric connector B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
❒ refit the protective cover A-fig. 19
correctly.
F0Q0704m fig. 20
Gas-discharge lamps (Bi-Xenon)
(for versions/markets, where provided)
WARNING
Due to high voltage, the bulb
of (Bi-Xenon) gas-discharge
headlights must only be replaced by
experts: danger of death! Contact
Fiat Dealership.
F0Q0705m