Manual Climate Control System - Fiat Panda Owner's Handbook Manual

MANUAL CLIMATE
CONTROL SYSTEM
(where provided)
CONTROLS fig. 47
Air temperature knob A
(mixing hot and cold air)
Red section = hot air
Blue section = cold air
Fan activation and climate control
system on/off knob B
0 = fan off
1-2-3 = fan speed
- = top fan speed
Press the knob to turn the climate control
system on, the knob led will turn on. Press
it again to turn it off, the knob led will turn
off.
fig. 47
Air recirculation on/off knob C
U = outside air intake
T = inside air recirculation
This function is particularly useful when
the outside air is heavily polluted (in a traf-
fic jam, tunnel etc.). However, it is better
not to use it for long periods, especially
if there several people in the car.
IMPORTANT The inside air recirculation
system makes it possible to reach the re-
quired "heating" or "cooling" conditions
faster. Do not use the air recirculation
function on rainy/cold days as it could con-
siderably increase the possibility of the
windows misting inside.
Air distribution knob D
¥ air flow from central vents and side
outlets;
μ to warm the feet and keep the face
cool ("bilevel" function);
w to speed up passenger compartment
warming;
≤ to warm the passenger compartment
F0G0600m
and at the same time demist the wind-
screen;
- to demist and defrost the windscreen
and front side windows.
VENTILATON
To ventilate the passenger's compartment
properly proceed as follows:
❒ central and side vents completely open;
❒ turn knob A to the blue section;
❒ turn knob C to
U;
❒ turn knob D to ¥;
❒ turn knob B to the required speed.
41