Fluids And Lubricants - Fiat Panda Owner's Handbook Manual

FLUIDS AND LUBRICANTS

RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use
Oils for
Synthetic-based oils, grade
petrol engines
SAE 10W-40, that pass ACEA A3 and API SL
specifications.
Oils for
Synthetic-based oils, grade
diesel engines
SAE 5W- 40, that pass
(1.3 Multijet
ACEA B4, API CF and FIAT 9.55535- M2
versions)
specifications.
For regular operation of Multijet versions with DPF, use only original oil. In an emergency (lacking the original product) only top up
with max. 0,5 l and then drive immediately to the nearest Fiat Dealership.
If using non original SAE 5W-40 products, oils with minimum ACEA A3 specifications for petrol engines and ACEA B4 specifica-
tions for Diesel engines are admitted; in this event top engine performance is not guaranteed.
Use of products with low-quality properties than ACEA A3 and ACEA B4 could cause damages to the engine that are not covered
by the warranty.
For very cold climate conditions, ask Fiat Dealership for the appropriate Selenia product to use.
Fluid and lubricant specifications
for correct car operation
Original fluids and
lubricants
SELENIA 20K
According to
Service Schedule
According to
SELENIA WR
Service Schedule
Change
191