Standard Cmos Setup - ECS GF7050VT-M5 Manual

For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS setup
screens shown in this chapter are for reference only and may differ from the
actual BIOS. Please visit the manufacture's website for updated manual.

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2007, American Megatrends, Inc.
Date
Time
Primary IDE Master
Primary IDE Slave
SATA 1
SATA 2
SATA 3
SATA 4
IDE BusMaster
Drive A:
: Move
F1: General Help
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary IDE Master/Slave, SATA 1~4
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports four SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
CMOS SETUP UTILITY – Copyright (C) 1985-2007, American Megatrends, Inc.
Primary IDE Master
Device : Not Detected
Type
LBA/Large Mode
Block (Multi-Sector Transfer
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
: Move
F1: General Help
Introducing the Motherboard
Standard CMOS Setup
Wed 10/10/2007
00 : 02 : 56
User [ENTER], [TAB]
Not Detected
or [SHIFT-TAB] to
Not Detected
select a field.
Not Detected
Not Detected
Use [+] or [-] to
Not Detected
configure system Date.
Not Detected
Enabled
1.44 MB 3 1 / "
2
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Optimized Defaults
Primary IDE Master
Select the type
Auto
of device connected
Auto
to the system.
Auto
Auto
Auto
Auto
Enabled
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Help Item
Help Item
29