Checking Jumper Settings; Jumper Settings - ECS GF7050VT-M5 Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper Type Description
CLR_CMOS 3-pin
Clear CMOS
Front Panel
USBPWR_F
3-pin
USB Power
Select Jumper
Rear USB/PS2
USBPWR_R 3-pin
Power Select
Jumper
1. To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Optimal Defaults"
and then "Save Changes and Exit".
2. Make sure the power supply provides enough 5VSB voltage before
selecting the 5VSB function.
3. It is required that users place the USBPWR_F & USBPWR_R cap onto
2-3 pin rather than 1-2 pin as default if you want to wake up the com-
puter by USB/PS2 KB/Mouse.
Installing the Motherboard
Setting (default)
1-2: NORMAL
1
2-3: CLEAR CMOS
Before clearing the
CLR_CMOS
CMOS, make sure to
turn off the system.
1
1-2: VCC
2-3: 5VSB
USBPWR_F
1-2: VCC
2-3: 5VSB
USBPWR_R
9
1