Your Programmer; Product View; Resetting The Unit - Danfoss SET 3E User Manual

1.0 User Instructions

1.1 Your Programmer

The SET3E allows you to switch your hot water and heating on and off
automatically, at times that suit you.
The programmer provides 2 ON times and 2 OFF times per day, and
by the use of a simple rocker switch you can run your heating and hot
water separately, to suit your lifestyle.
GB
ADVANCE button

1.2 Resetting the Unit

IMPORTANT: Before you start you should reset the unit. This will
reinstate the preset programmes.
To do this:
• move slide switch to SET TIME
position.
• using something non-metallic
(i.e a matchstick) press into the
small hole as shown opposite.
6
and
Slider switch
and +1
HOUR button
Rocker switches
RESET
SET3E