Danfoss Icon Display User Manual

230 v

Hide thumbs Also See for Icon Display:

Download this manual

User Guide

Danfoss Icon™ Display

Room Thermostat, 230 V

Introduction

Wake up

the thermostat

Set the temperature

Reset to default

factory settings

VUMBB102

Danfoss Icon™ Display is a room thermostat especially designed for floor heating systems. It comes in

four different designs to suit markets worldwide.

Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and

the thermostat will control the room temperature in accordance with your setting.

Touch the screen to wake up Danfoss Icon™ Display.

The actual room temperature is displayed. The Heating icon

played, if the thermostat has turned on the heat.

Touch

to return to the previous screen.

The screen turns off after 10 seconds without any action.

Wake up the thermostat

Touch

to set the desired room temperature.

The temperature flashes to indicate setting is in progress.

Confirm your setting by touching .

simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the default

Press

and

factory settings.

The display toggles between

Confirm by touching .

and

is dis-

Page 1 Danfoss Icon™ Display is a room thermostat especially designed for floor heating systems. It comes in four different designs to suit markets worldwide. Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and the thermostat will control the room temperature in accordance with your setting.
Page 2 • www.floorheating.danfoss.com Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.