Cleaning The Fuel Valve Filter / Draining The Fuel Tank - Clarke Power FG3000 Operation & Maintenance Instructions Manual

CLEANING THE FUEL VALVE FILTER / DRAINING THE FUEL TANK

1. Set the fuel supply valve to OFF.
2. U nscrew and remove the cup,
then remove the valve filter and
'O' ring.
3. Wash these parts in a non-
inflammable solvent. Make sure
that the valve filter is not
damaged.
4. Place an approved petrol storage
container under the fuel valve
and set the fuel supply valve to
'ON'.
• The fuel in the tank will drain
into the container.
5. Replace the 'O' ring and valve
filter and tighten the cup as far as
possible.
Add pic
VALVE FILTER
'O' RING
CUP
19