Changing The Spark Plugs - Clarke Power FG3000 Operation & Maintenance Instructions Manual

CHANGING THE SPARK PLUGS

CAUTION: ALLOW THE ENGINE TO COOL BEFORE REMOVING THE SPARK
PLUG.
1. Remove the spark plug cap from
the spark plug.
2. Use the supplied spark plug
spanner to remove the spark plug.
3. Remove any carbon that has
accumulated around the
sparkplug.
4. Check the spark plug gap (a), it
should be between 0.7 and 0.8
mm, adjust if necessary.
5. Check the overall condition of the
spark plug and replace if
necessary.
6. Reinstall the spark plug and
replace the spark plug cap.
Add pic
17