Red Hat Cluster for Enterprise Linux 5 Configuration page 62

2. At the bottom of the right frame (labeled Properties), click the Create a Service button.
Clicking Create a Service causes the Add a Service dialog box to be displayed.
3. At the Add a Service dialog box, type the name of the service in the Name text box and
click OK. Clicking OK causes the Service Management dialog box to be displayed (refer to
Figure 4.9, "Adding a Cluster Service").
Tip
Use a descriptive name that clearly distinguishes the service from other ser-
vices in the cluster.
Figure 4.9. Adding a Cluster Service
4. If you want to restrict the members on which this cluster service is able to run, choose a
failover domain from the Failover Domain drop-down box. (Refer to Section 6,
"Configuring a Failover Domain" for instructions on how to configure a failover domain.)
5. Autostart This Service checkbox — This is checked by default. If Autostart This Service
8. Adding a Cluster Service to the Cluster
54