Starting The Cluster Software - Red Hat Cluster for Enterprise Linux 5 Configuration

10. Starting the Cluster Software

After you have propagated the cluster configuration to the cluster nodes you can either reboot
each node or start the cluster software on each cluster node by running the following com-
mands at each node in this order:
1.
service cman start
2.
service clvmd start
3. , if you are using Red Hat GFS
service gfs start
4.
service rgmanager start
5. Start the Red Hat Cluster Suite management GUI. At the Cluster Configuration Tool tab,
verify that the configuration is correct. At the Cluster Status Tool tab verify that the nodes
and services are running as expected.
10. Starting the Cluster Software
57