Using The [Playback] Mode Menu; [Slide Show] - Panasonic DMC-G2R Operating Instructions Manual

Using the [PLAYBACK] mode menu

You can use various functions in playback mode to rotate pictures, set protection for them
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [ASPECT CONV.], a new edited picture is
created. A new picture cannot be created if there is no free space on the card so we
recommend checking that there is free space and then editing the picture.
You can play back the pictures you have taken in synchronisation with music, and you can
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show composed of only still pictures, only motion
pictures, only pictures of a particular category, or only favourites.
We recommend this feature when you view your pictures by connecting the camera to a
TV.
Select [SLIDE SHOW] on the [PLAYBACK] mode menu. (P33)
Press 3/4 to select the item and then press
[MENU/SET].
•
[FAVORITE] can be selected only when [FAVORITE] on the
[PLAYBACK] menu (P160) is at [ON] and there are pictures
already set as favourites.
•
During [CATEGORY SELECTION], press
a category, and then press [MENU/SET] to proceed to step
For details on categories, refer to P151.
Press 3 to select [START] and then press
[MENU/SET].
Press 4 to finish the slide show.
•
Normal playback resumes after the slide show finishes.
∫ Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
•
The menu screen is restored when [‚] is pressed.
A Play/Pause
B Stop
C Back to previous picture
D Ahead to next picture
¢ These operations can be performed only in the Pause Mode or
during motion picture playback.
E Reduce volume level
F Increase volume level

[SLIDE SHOW]

¢
¢
3/4/2/1
to select
3
.
Advanced (Playback)
149
VQT2S42