Panasonic DMC-G2R Operating Instructions Manual page 85

3
Press [MENU/SET] and enlarge the MF assist position setting screen.
•
MF assist is enlarged from 5 times to 10 times when the rear dial is rotated right. It will
return to 5 times by rotating the rear dial left.
•
For the operations while displaying the MF assist, refer to step
with Manual Focus
4
Press [MENU/SET] to close MF assist.
•
The screen returns to the previous screen.
∫ Move the MF assist easily with button operations
When the [DIRECT FOCUS AREA] (P141) in the [CUSTOM] menu is set to [ON], it is
possible to move the MF assist directly with 3/4/2/1.
•
[SENSITIVITY] (P92), [Fn BUTTON SET] (P139), [FILM MODE] (P94), or [WHITE BALANCE]
(P88) cannot be set with 3/4/2/1. Make the setting with the Quick Menu (P34).
∫ Technique for Manual Focus
1 Rotate the focus ring to focus on the
subject.
2 Rotate it a little more.
3 Finely focus on the subject by rotating the
focus ring slowly in reverse.
∫ About the focus distance reference mark
The focus distance reference mark is a mark
used to measure the focus distance.
Use this when taking pictures with Manual
Focus or taking close-up pictures.
A Focus distance reference mark
B Focus distance reference line
C 0.3 m (0.99 feet) (When the
F3.5 –5.6
lens included in DMC-G2K/
DMC-G2W is used)
D 1.0 m (3.28 feet) (When the
F4.0 –5.6
lens included in DMC-G2W is used)
•
If you are taking close-up pictures
–
We recommend using a tripod and the self-timer (P78).
–
The effective focus range (depth of field) is significantly narrowed. Therefore, if the distance
between the camera and the subject is changed after focusing on the subject, it may become
difficult to focus on it again.
–
The resolution of the periphery of the picture may decrease slightly. This is not a malfunction.
"
procedure.
14– 42 mm/
45– 200 mm/
Advanced (Recording pictures)
"
of the Taking Pictures
2
VQT2S42
85